Single Pumping
Note: For all tubing connections, press in
firmly until you get a secure connection
Double Pumping
Close unused tubing
port with attached plug
(press all the way in)
You may find it helpful to start with a higher speed and weaker suction to
trigger the stimulation phase and adjust to a lower speed and stronger
suction as you move into the expression phase.
Charge battery before use
For longest lasting battery a 2-3 hour charge
is recommended. A full charge will provide approximately 2.5 hours
of operation (approximately six 20min “pumping” sessions). Pump will
operate at full strength until battery is depleted.
Customizable Memory Buttons
Adjust Auto Shut
Off Timer
Increase & Decrease Speed
for suction and release cycles
Increase & Decrease
Suction Strength
Power On/Off
Battery Charge
Meter (displays bars
and percentage)
Auto Shut Off Timer
Suction Setting
Displays 1-10:
1=weakest,
10=strongest
Memory Setting
Displays M1, M2 or
M3 when memory
setting is activated
Speed Setting
Displays 1-10, Turbo:
(10= fastest suction
and release cycle
Turbo=slowest suction
and release cycle)
Auto Shut Off Timer
activated (top half
of logo disappears)
1
With gentle pressure just below
ribs, slide clip down (towards
pump) to disengage latch.
2
Press clip slowly towards the base
of the pump and carefully begin
to slide upward to disengage
from catch.
3
Slide clip away from pump (out
of slot).
Connecting your NUK Simply Natural Freemie Pump
Charging Your Pump
P156 (A)
NUK Simply Natural Freemie Pump Controls
Removing Your Clothing Clip
NUK Simply Natural Freemie Pump Display Indicators
