9
7. Pump Assembly
Before using the pump, disassemble and clean according to the instructions in
sections 5 and 6.
Repeat steps 1-6 for the other side.
Push the silicone cushion (1), onto the
opening of the breast shield (2).
Screw the Breast Milk Container (8)
onto the connection ring (5) on the
assembled breast shield.
Silicone-gasket (3)
Place the silicone gasket (3) onto the
breast shield connector (4) and screw the
breast shield connector clockwise into the
back of the breast shield (2).
Push the backflow
valve (6) into
the connection
ring (5) on the
breast shield (2).
Push the membrane
(7) into the hole of the
backflow valve (6).
1
2
3
4
5
6
7
Screw the connection ring (5) clockwise
onto the base of the breast shield (2).
ASSEMBLY INSTRUCTIONS:
NOTE:
Make sure all pieces are firmly in place to ensure good seals to create
a vacuum needed to express breast milk.
BREAST SHIELD ASSEMBLY
03_62772_5112_A_DEBP_Booklet_REL_2-19-13_Added pages divisible by 4.indd 9
3/18/2013 2:26:55 PM
