CODING
-
372048
MANDO
ASSEMBLY GUIDE
/ 4
2
STEP 6
STEP 4
STEP 2
STEP 5
STEP 3
STEP 1
1
3
4
5
10
11
12
3
4
3
4
5
1
3
4
5
1
2
3
4
5
- Insert hardware A1 onto panel (3) and (4).
(Repeat 4 times.)
- Insert hardware A2 onto panel (1).
(Repeat 4 times.)
- Insert hardware B onto panel (3), (4) and (5).
(Repeat 16 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
PRESS
A1
x4
A2
x4
ROTATE
x16
PRESS
B
5
- Insert hardware A1 onto panel (12).
(Repeat 4 times.)
- Insert hardware A2 onto panel (10) and (11).
(Repeat 4 times.)
- Insert hardware B onto panel (10) and (11).
(Repeat 4 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
PRESS
A1
x4
A2
x4
ROTATE
x4
PRESS
B
12
Fix hardware K1 (L/R) into panel (3) and (4) with hardware E.
(Repeat 3 times for each hardware.)
SCREWDRIVER
REQUIRED
x2
ROTATE
x2
x2
ROTATE
ROTATE
K1(L)
E
E
E
Third hole from the edge.
First hole from the edge. Small hole at the center.
K1(R)
Attach panel (3) and (4) to panel (5).
(Repeat 2 times.)
* In this step hardware B are pre-inserted.
5
- Attach panel (1) to panel (3) and (4).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 4 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
5
ROTATE
Section View
x4
A2
A1
x4
PRESS
A3
Connect panel (2) to panel (3) and (4)
by using hardware C and D.
(Repeat 4 times.)
ROTATE
x4
C
D
* In this step hardware B are pre-inserted.
HARDWARE
D
5
