CODING
-
133081
MANDO
ASSEMBLY GUIDE
/ 4
2
STEP 6
STEP 4
STEP 2
STEP 5
STEP 3
STEP 1
1
3
4
5
6
7
8
9
10
3
4
5
5
3
4
6
7
1
3
4
5
6
7
- Insert hardware A1 onto panel (3), (4), (5) and (6).
(Repeat 10 times.)
- Insert hardware A2 onto panel (1), (3) and (4).
(Repeat 10 times.)
- Insert hardware B onto panel (3), (4), (5) and (6).
(Repeat 8 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
A2
ROTATE
PRESS
A1
x10
x8
PRESS
B
x10
- Insert hardware A1 onto panel (10).
(Repeat 4 times.)
- Insert hardware A2 onto panel (8) and (9).
(Repeat 4 times.)
- Insert hardware B onto panel (7), (8) and (9).
(Repeat 8 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
10
PRESS
A1
x4
x8
PRESS
B
A2
x4
ROTATE
Fix hardware I1 (L/R) into panel (3), (4) and (5) with hardware E.
(Repeat 3 times for each hardware.)
SCREWDRIVER
REQUIRED
x3
ROTATE
x3
x3
ROTATE
ROTATE
I1(L)
E
E
E
Third hole from the edge.
First hole from the edge. Small hole at the center.
I1(R)
I1(L)
Fix hardware I1 (R) into panel (5) with hardware E.
(Repeat 3 times for each hardware.)
Third hole from the edge.
First hole from the edge.
Small hole at the center.
I1(R)
x1
x1
x1
ROTATE
ROTATE
ROTATE
E
E
E
- Attach panel (3) and (4) to panel (6) and (7).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 2 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
ROTATE
Section View
x2
A1
A2
x2
PRESS
A3
- Attach panel (1) to panel (3), (4), (5) and (6).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 8 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
ROTATE
Section View
x8
A2
A1
x8
PRESS
A3
