SUMMARY
OPTIONS SELECTION
At the back of the thermostat, there are two selection switches to set
your preference.
Temperature in °C or °F.
Time in 12 or 24 hours.
TO SET TIME AND DAY
Press on DAY, HOUR and MIN buttons to adjust time and day.
TO RECORD THE
(COMFORT) SETPOINT TEMPERATURE
Select chosen setpoint temperature by using
or
button. Press on
button (2 to 3 seconds) until icon appears on display.
TO RECORD THE
(ECONOMIC) SETPOINT TEMPERATURE
Select chosen setpoint temperature by using
or
button.
Press on
button (2 to 3 seconds) until icon appears on display .
CHECKING GROUND FAULT CIRCUIT INTERRUPTER (GFCI)
Adjust the setpoint temperature until heating indicator (
) appears on
display. Press on TEST button. The test is conclusive if the warning light
(GFI) on thermostat is ON and power to the load is cut-off (
remain
on display though). If these events do not occur, check the installation.
Press on RESET button to reset the GFCI.
OPERATING MODES
To select an operating mode, use MODE button.
AUTO:
Runs the program.
or
shows temperature setting
and can temporarily override your programming up to the
next program.
MAN:
Maintains the selected temperature.
or
changes
the temperature setting.
MODEL FTGF2P (240 VAC)
u
1
2
u
u
u
u
u
