Display when the ultrasonic
probe or the low frequency
patch is not connected to the
output terminal
Output display
Internal overheat
Error code is shown when
the internal temperature
is overheated.
Ultrasound
Output Display
Abnormal Ultrasound Operation Checklist
If ‘- -‘ appears on the
ultrasound output
strength display
If ‘- -‘ appears on the
low frequency output
strength display
Check if the ultrasound probe is properly
connected to the device. If the ultrasound probe
is not connected, connect it and try again.
Check if the low frequency patch is properly
connected to the device. If the low frequency
patch is not connected, connect it and try again.
Abnormal Low Frequency Operation Checklist
Display
Descriptions
Indicated Location
Before any A/S Request
Check items for any abnormality
in the power supply
NM-700P
Product Storage and Care
Caution
Ensure checking out the following before applying for A/S if any
abnormality occurs in the product.
The product might fail to operate normally even without any failure
if you use it without reading the manual.
Caution
Do not disassemble the product arbitrarily if any error occurs, but
remove the power plug, turn off the power switch, and then contact
your supplier.
If you disassemble the product arbitrarily, it might cause serious
injuries and/or damage to the product.
