Nuga NM-5000 User Manual Download Page 3

Danger

Warning

Put the projector cover on the 
projector while using the
projector to keep the projector 
from touching the skin directly.
(Otherwise, it is likely that injuries
occur.)

Ensure applying the product 
only abdominal area manually, 
while keeping the product from 
applying to the area around ribs 
if you have to apply the product 
to the abdominal area.

Avoid applying the projector directly 
to eyeballs to prevent from any risk.
(Otherwise, it might cause damage
to eyeballs.)

Avoid placing inflammable 
substances like candlelight, 
cigarette light or liquors and/or 
vessels containing water, heavy 
objects or other objects on the 
product.
(Otherwise, it might cause fire.)

Do not insert many power 
plugs for other products into 
a socket to be used 
simultaneously.
(Otherwise, it might cause 
electric shock, injury and/or 
damage to the product.)

Avoid twisting the body while 
the internal projector is being 
operated.
(Otherwise, it might cause 
excessive influences to the 
spine.)

Avoid using any band or belt 
that does not come as one of 
components from the purchase 
of the product.
(Otherwise, it might cause 
damage to the product.)

Avoid jumping on the product 
or any other action to provide 
shocks to the product.
(Otherwise, it might cause 
injuries and/or damage to the 
product.)

Use the product after checking
out any damaged or worn-out 
cord.
(Otherwise, it might cause 
electric shock, injury and/or 
damage to the product.)

Avoid bending the power cord 
excessively or pressing it down 
with heavy objects.

Do not allow any child to use the 
product alone.

Avoid pulling out the power cord 
parts or touching the power plug 
with the wet hand.
(Otherwise, it might cause the 
electrical shock or fire.)

Immediately stop using the 
product and turn off the power 
if there is any thunder, lightning 
or earthquake.
(Otherwise, it might cause the 
electrical shock or fire.)

Avoid using the product in a 
closed place with any fuel 
and/or chemical.
(Otherwise, it might cause 
injuries or fire.)

Avoid using the product in a 
place with a great deal of dusts 
or intensive temperature change.
(Otherwise, it might cause the 
electrical shock or fire.)

Anyone other than technicians 
qualified for our company’s A/S 
shall not disassemble, repair or 
modify the product by any means.
(Otherwise, it might cause damage 
to the product or electric shock 
and/or fire.)

NM-5000

Cautions for Safety

Prohibit any pregnant woman 
near the parturition, patients with 
rachischisis, patients wearing a 
cardiac pacemaker and/or 
patients with severe heart 
diseases from using the product.

Apply the product to the area 
with any surgery and/or 
treatment, after consulting with 
the store or the company from 
which you have purchased the 
product.

Summary of Contents for NM-5000

























Reviews: