NuForce HAP-100, User Manual, Page: 4 / 9

2
WARNING: Never attempt to disassemble, repair or make any modification to your
device. Disassembly, modification or any attempt at repair could cause bodily injury or
property damage, as well as damage to the device itself.
WARNING: Your device is not a toy. Never allow children to play with your device.
Misuse, rough or improper handling of your device by children could result in serious
bodily injury for any of the enumerated safety warnings in this manual. In addition,
always keep all accessories and components out of the reach of small children as
small parts might present a choking hazard. Seek immediate medical attention if
choking occurs or if any small part has been swallowed.
CAUTION: Never raise the sound volume level too high when using your device with
earphones. An excessive sound volume level could cause damage to your hearing.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to
moisture or water.
Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture,
or a foreign object gets into the enclosure, immediately disconnect the power cord
from the wall. Take the unit to a qualified service person for inspection and necessary
repairs.
Read all the instructions before connecting or operating the component.
Keep this manual so you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the product itself.
Follow all operating instructions.
Do not use this unit near water.
You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the
unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block the
ventilation openings. If the unit is placed in a bookcase or cabinet, there must be
ventilation of the cabinet to allow proper cooling. Keep the component away from
radiators, heat registers, stoves, or any other appliance that produces heat.
The unit must be connected to a power supply only of the type and voltage specified
on the rear panel.
Connect the component to the power outlet only with the supplied power supply cable
or an exact equivalent. Do not modify the supplied cable.
Do not route the power cord where it will be crushed, pinched, bent, exposed to heat,
or damaged in any way. Pay particular attention to the power cord at the plug and
where the cord exits the back of the unit.
The power cord should be unplugged from the wall outlet during a lightning storm or if
the unit is to be left unused for a long period of time.
Immediately stop using the component and have it inspected and/or serviced by a
qualified service agency if:
•
The power supply cord or plug has been damaged.
•
Objects have fallen or liquid has been spilled into the unit.
•
The unit has been exposed to rain.
•
The unit shows signs of improper operation.
•
The unit has been dropped or damaged in any way.