7
________________________________________________________________________________________________
382 South Abbott Avenue, Milpitas, CA 95035, USA
•
PHONE: +1-408-890-6840
•
FAX: +1-408-262-6877
nuforce.com
•
EMAIL: [email protected]
•
Skype: nuforce-sales
D
– Dim. Dim shuts off the front panel LED and digital display. During dimmed
operation the remote and front-panel operate as usual. The display will light up briefly
when any button is pressed.
Selecting Fixed Analog Output level
With its digitally controlled Analog Volume Control, the DAC-9 operates as a preamp.
Where the DAC-9 is used with a separate preamp, the DAC-9’s analog output can be
locked to fixed outputs. When enabling the Fixed function, a relay will bypass Analog
Volume.
To enable Fixed Output, using either the front panel control or remote control, raise
the volume level to 99. Using only the front-panel Volume-Up key, raise the volume
level to the 1 step. The display will go blank, thus indicating that Fixed Output has
been achieved.
Note: The remote control’s Volume Up/Down keys are disabled when the DAC-9 is
set to Fixed Output.
To disable Fixed Output, use the front panel’s Volume-Down key. The display will
show 99, indicating that the fixed output has been disabled.
Specifications:
Digital Inputs:
6 selectable digital inputs, transformer or optical isolated, AC coupled.
Maximum bit depth: 24 bit
Maximum sample rate: 192kHz; USB spec (96k option): 44.1kHz, 48kHz, 96kHz
Analog Outputs
Output Impedance: RCA, 0.01 Ohm; XLR , 50 Ohm; Headphone 10 Ohm
Output voltage 0dB 1kHz: RCA 2.0/4.0Vrms, XLR 4.0/8.0Vrms (Low output/High
output versions)
Headphone power spec:
288mW rms @ 30 Ohm
210mW rms @ 120 Ohm
152mW rms @ 300 Ohm
THD+N: 0.01, 0dB, 1kHz
Signal to Noise ratio: 103dB, 1kHz, A-weighted
Frequency Response: 20-20kHz +/- 0.25dB
Power consumption: 9W
AC voltage: 100V/110V/220V/230V depending on countries
Dimension: 215mm (w) x 400mm (d) x 60mm (h)
Weight: 3.2Kg net, 4.5Kg shipped
