6. Test your skin to make sure you are not sensitive to the NuFACE primer. To do
so, rub a dime-sized amount of the primer on your forearm and leave for 15–30
minutes before washing it off. If an allergic reaction develops within 24 hours,
you should not use the Trinity device and treatment attachments in conjunction
with the NuFACE primer. Immediately consult NuFACE for an alternate
conductive medium.
7. Before treatment, take a photo of your cleansed face in a well-lit room to document
your results. After treatment, take a photo of your face/problem areas. Every
eight weeks, take another photo of your face in the same room with the same
lighting and at the same location. Compare results to previous weeks of treatment.
USAGE INSTRUCTIONS
INDICATIONS FOR USE
The Facial Trainer is intended for facial stimulation and is indicated for over-the-
counter cosmetic use.
CONTRAINDICATIONS FOR USE
• Do not use if you have a history of epilepsy or seizures.
• Do not use if you have had recent facial surgery or other surgical procedure —
consult your doctor.
• Do not use if you have an electronic implanted device such as a defibrillator,
neurostimulator, pacemaker, or ECG Monitor. If you use a body-worn medical
device, such as an insulin pump — consult your doctor prior to use.
• Do not use if you have any active cancer or over any suspicious or cancerous
lesion — consult your doctor.
• Do not use if you are pregnant.
• Do not use on infants and children under the age of 18, and keep device and
attachments out of the reach of children.
TREATMENT STEPS
1. For best results, create your own routine with the NuFACE App at
mynuface.com/
app
or view the brief instructional video at
mynuface.com/how-to
and follow all of
the steps indicated in the “Before Using Your Device” section.
2. Cleanse your face with an oil-free cleanser. Men should shave before treatment,
as facial hair can interfere with the conductivity of the spheres.
Note: Any
make-up and/or oil-based products left on the skin can block the penetration
of microcurrent.
3. Ensure that you have no allergic reaction to the NuFACE primer before
proceeding. Refer to “Before Using Your Device.
4. Apply the NuFACE primer section by section as you treat to prevent it from
drying. NOTE: To ensure microcurrent penetration, use enough NuFACE primer
to create a mask-like layer (do not rub in).
5. Remove your device from the charging cradle, and turn it on by pressing the ON/OFF
button. An ascending audible beep is emitted notifying you that your device is on.
6. Adjust the intensity level to your comfort by pressing the intensity control
buttons on the front of your device, either up (+) or down (-). As you increase
or decrease intensity, the number of illuminated blue lights will change. At
maximum intensity, all five blue lights will be illuminated. At minimum intensity,
only one blue light will be illuminated. It is normal not to feel any sensation when
using the Trinity device.
7. Place the Facial Trainer in direct contact over the area to be treated. See
“Treatment Areas” on next page. Always keep both spheres on your face at
the same time and glide or hold with medium pressure. The device emits a
beep every five (5) seconds to indicate when to move to the next treatment
position. This beep will change to two (2) low tones when the battery is in need of
recharging. NOTE: The Facial Trainer will not contract the muscles. The current is
soft, very soothing, and mild when used correctly.
8. Do not allow the NuFACE primer to dry during treatment. Reactivate the
NuFACE primer by applying more primer to the treatment area(s).
9. After treatment is complete, remove the NuFACE primer with a damp cloth.
10. Turn off the Trinity device after every treatment. A descending audible beep is
emitted notifying you that your device is turning off.
4
