NUCTECH COMPANY LIMITED
2
I
Instructions and verification manual
Dear users, welcome to use this smart lock. Please check the product list carefully and read the
operating manual before you install and use the product. Please choose professionals to install the
door lock and operate it according to the installation standard provided by our company. Don’t
disassemble and assemble the door lock without permission, and protect relevant sealing signs so
as to avoid unnecessary troubles during the quality maintenance period.
★
Instructions
1. In the initial state, the door can be unlocked by any fingerprint and any 6-12-digit password.
Please complete the registration as soon as possible after the smart lock is debugged as qualified.
2. There are 199/170 fingerprints: 10 groups of Administrator fingerprints (ID 001-010), 160
groups of user fingerprints (ID 011-170), and 0/29 groups of temporary fingerprints (ID 171-199).
3. There are 10 groups of passwords (the valid digit number of passwords is 6-12), including a
group of administrator passwords, and 9 groups of temporary/user passwords.
4. There are 100 groups of cards (ID 001-100).
5. There are 4 types of unlocking methods: fingerprint, password, mechanical key, and card
(optional).
6. There are two power supply modes: the main power supply (4 AA batteries, the normal service
life is 1 year); the standby power supply (when the batteries run out) which is connected with USB.
7. Safety button: This button has the function of preventing the cat eye when it is enabled, and the
door can't be opened inside. When it is disenabled, the function of preventing the cat eye will fail,
but the door can be opened normally by pressing the handle inside.
8. The unlocking permissions are shown in the following table:
Type
Unlocking permissions
Common mode
(password/fingerprint)
Finge
password
unlocking mode
Finge
fingerprint
unlocking mode
Back
locking
mode
Channel
mode
Administrator
fingerprint
√
√
√
√
√
Administrator
password
√
√
×
√
√
User fingerprint
√
√
√
×
√
Temporary
fingerprint
√
×
×
×
√
Temporary
password
√
×
×
×
√
Card (optional)
√
×
×
×
√
Mechanical key
√
√
√
√
√
★
Verification manual for successful installation
After the entire lock is installed, make sure that the following validation must be carried out and all
validation items must be normal. The lock must be reinstalled if there is any wrong with any of them.
Please contact the local customer service or call the service hotline of our company in time when
necessary.
No.
Verification item Verification method
1
Power-on test
Wake up the system by sliding the cover or touching the screen after installing four
batteries.
2
Internal handle
test
The door should be locked by lifting the internal handle, and unlocked by pressing
the internal handle, and the handle should be pulled flexibly and returned
smoothly.
3
External handle
test
The door should be locked by lifting the external handle, but not unlocked by
pressing the external handle, and the handle should be pulled flexibly and
returned smoothly.
4
Safety button test The door cannot be locked or unlocked when the safety button of internal handle