Step 1: Tables over 120”
•
Locate the beam labels and match for correct placement of the bases.
•
Loosen clamp bars from base.
•
Attach end bases by sliding the clamp bars into the beams.
–
Beams should be 1/8” from the top of the base panel.
•
Tighten cap screws to secure.
•
Repeat to attach beams to center base. Keep beams tight and flush at the joint.
Summary of Contents for Flow XT
Page 1: ...Flow XT Installation Instructions ID...
Page 5: ...Flow XT Table...
Page 16: ...Flow XT Table Post Leg Base...
