Step 3: Work Surface Frame
•
Frames are made of 3 or 4 sections. Each section is labeled for correct placement.
•
Begin at one end, and work towards the opposite end. Place the u-slots of the frame in the channels
of the vertical supports.
•
Secure when all sections are in place.
–
Vertical supports have 2 fastening locations:
•
Four HW1093 bolts in the u-slots. Keep these loose for adjustment.
•
Two HW3717 set screws that will be used for leveling the frame.
–
Base extrusion and cross legs will have two HW1107 bolts and HW1094 nuts connecting the
base to the frame.
Summary of Contents for Crossbeam
Page 1: ...Crossbeam Installation Instructions ID...
Page 4: ...Crossbeam...
