Option 2
1)
Connect an Ethernet cable from a spare Ethernet jack on the router to the WAN
jack of the babyBOX.
2)
Connect your telephone set to the PHONE1 jack of the babyBOX.
3)
Plug the AC adapter that came with the babyBOX into a wall socket, or
preferably, into a surge-protected power bar. Connect the power cord from the
adapter to the PWR socket of the babyBOX.
4)
Cycle the power on your router (unplug the power connector, wait 5 seconds and
plug it back in).
5)
Depending on the configuration of you network the babyBOX will now obtain an
IP address, this will be needed to manage the device. Please refer back to “IP
Address Configuration” for details on configuring the babyBOX.
Nucleus babyTEL Configuration Guide - © 2005 Nucleus Information Service Inc.
Page 12 of 12
