>
O
<
>
<
preset
>
O
<
>
<
default
>
O
<
>
<
preset 1
>
O
<
>
<
default to
factory setting?
Here you can recall
a previously saved
preset by selecting
preset 1, 2 or 3
and
confirm with the key.
To save a preset, select
save as
. Choose in which of the three
memories you wish to save your settings, using the
or
keys and con irm with the key. All settings in the menu
sound
,
system hp, subwoofer, analog gain
are saved.
The nuPro’s electronics have an automatic standby function
that automatically switches the loudspeaker into power-saving
mode when it is not needed – and also switches it back on
again automatically when a signal is detected. If the menu item
off
is selected here, this is automatically deactivated.
Note
: For more information on the automatic standby function,
see page 13 in the
Design and Engineering
section
.
This menu item is used to restore the loudspeaker to the factory
settings. Press the button to confirm the reset operation.
Loading
is displayed until the reset is complete.
Note:
Alternatively, the reset can be performed at any time by
pressing the key for 6 seconds.
Note:
If no settings are made, the display automatically changes back to displaying the volume or the nuPro
logo after 8 seconds. As the display changes, all settings made are automatically saved. However, if power is
disconnected before the automatic saving takes place, the last saved settings will be loaded on restart.
>
O
<
>
<
save as
>
O
<
>
<
save as
p1
>
O
<
>
<
auto power
>
O
<
>
<
auto power
on
The
advanced
main menu,
continued from page 11
MAIN MENU
SUB-MENUS
>
O
<
>
<
advanced
>
O
<
>
<
display set
>
O
<
>
<
content
the
volume menu
or the
nuPro logo
.
Display
content
sets
whether the display
shows…
>
O
<
>
<
volume
>
O
<
>
<
normal
>
O
<
>
<
light
Display
light
adjusts the
brightness of the display:
normal
permanent full brightness
autodim
the displays dims
automatically after
10 seconds
auto off
the display turns off
automatically after
10 seconds.
12
nuPro X-8000
·
E1
2
· 12/2019 EN
