![NUBEAM NB-500 User Manual Download Page 5](http://html1.mh-extra.com/html/nubeam/nb-500/nb-500_user-manual_1716217005.webp)
5. Instruction Manual
Below functions are operational only when the main body is On.
Turn on the power of main body before using the unit.
1. Directional Signal Lights
•
Operating: Press/hold the left/right button on the remote control to signal directions.
- Flash 5 times: Press the designated direction for 0.5 second.
(For signaling before immediate directional change)
- Flash 30 times: Hold the designated direction for 1 second.
(For signaling during upcoming directional change)
- Stop : Press signal button again during operation to discontinue signaling
2. Anti-Theft Mode
•
How to set :
- Hold (for 2 seconds) the M button on the middle of the remote control. With a beep sound
on the main body and remote control, anti-theft mode will be activated.
- To deactivate, hold the M button (for 2 seconds) again and anti-theft mode will be deactivated
with a beep sound on the main body and remote control.
•
During anti-theft mode :
- The LED lights (Left/Right buttons) on the remote will flash every 4 seconds.
- When the main body and remote control is not within operable distance, the left/right directional signal
control on the remote will flash alternately.
•
This product is for theft prevention security measures only
,
therefore It is recommended to use this product with additional locking devices.
•
Operable distance of the remote and main body may vary depending on the surrounding conditions.
•
During anti-theft mode, continuous operation may speed up battery consumption.
(Maximum of 6 hrs when continuously operating anti-theft mode)
•
When anti-theft mode is unnecessary, deactivate anti-theft mode to reduce battery consumption.
•
In the case of theft
- With an alarm, the LED lights (Left/Right buttons) on the remote will flash fast (every 0.5 seconds).
- The LED on main body will be on for 5 minutes with an alarm.
(one left-end LED and one right-end LED will be blinking, while 4 LED’s in the middle will be steadily on)
- When deactivating anti-theft mode, hold the M button (for 2 seconds) on the remote control.
5