NuAire NU-5800, Operation And Maintenance Manual

Page: 20 / 48

OM0211 Page 20 of 48
Rev 3 March 2013
8.3.4 Accessing the Incubator Control Screens
Accessing the many Control screens, performing functions and diagnostic tests, and maneuvering through the
NU-Touch LCD menu system is accomplished through the following methods:
•
Touching a “graphic” Icon like the NuAire Logo in the Main Screen which access the System Settings menu,
or lead you to an Enter Password screen when a password has been established.
•
Touching a “Button function” button command that is visible on the screen.
The button will have text in it indication the function you are about to perform.
The following buttons are used on the NU-5800:
An explanation of these buttons is as follows:
Save – This command saves the changes you have made and returns you to the calling screen or,
in some cases, back to the main menu.
Exit – This command exits you from the current screen and returns you to the calling screen.
Close – The command causes the current screen to be removed and returns back to the calling screen.
Cancel –
This command will cancel the changes you have made, and in some circumstances,
cancels the “set of requests” that you have entered and returns you back to the calling screen
(e.g., Cancel in the middle of some of the CO2 zero/span screens returns you to the calling screen).
Start – This command causes a main event to begin (e.g. CO2 zero/span calibration).
Next Step – This command causes another step (screen), in a list of steps (screens) to be displayed
(e.g., some CO
2
calibration screens).
Back – This command returns you to the previous screen.
•
Touching a “Text” button command. The text or numerical value will be in blue indicating that is a link
similar to the computer or on the internet. The system settings menu screen shown below is a good
example of both the Text commands and Button commands:
Note: The Main Screen is the one exception for the above described buttons.
The green clock text is and is a link to adjusting the time.
The large white Control system measured values are also a “second” link to the “Environmental
Set-Points” menu and the control system descriptions are a link to system description pop up
screens when touched.
