2
26. 05. 20. Document Number 671944
Nuaire |
Western Industrial Estate
|
Caerphilly
|
CF83 1NA
|
nuaire.co.uk
MEV-ECO(-H)
Installation Manual
1.2 Important Information
This manual contains important information on the safe and
appropriate assembly, transport, commissioning, operation,
maintenance, disassembly and simple troubleshooting of the product.
While the product has been manufactured according to the accepted
rules of current technology, there is still a danger of personal injury or
damage to equipment if the following general safety instructions and
the warnings contained in these instructions are not complied with.
•
Read these instructions completely and thoroughly before
working with the product.
•
Keep these instructions in a location where they are accessible
to all users at all times.
•
Always include the operating instructions when you pass the
product on to third parties.
1.3 Personal Protective Equipment
The following minimum Personal Protective Equipment (PPE) is
recommended when interacting with Nuaire product:
•
Full Finger Gloves (Marigold PU800 or equivalent) -
when
handling sheet metal components.
Nuaire would always recommend a site specific risk assessment by a
competent person to determine if any additional PPE is required.
2.0 INTRODUCTION
The MEV-ECO(-H) units are designed to provide continuous mechanical
extract ventilation to dwellings in accordance with Part F of the building
regulations, the units are listed on the Product Characteristics Database
(PCDB).
The unit offers three independently variable speed settings for trickle,
boost and purge ventilation rates.
The unit may be used for supply, or extract, however, the different
applications will require variations to the completed installation e.g.
filtration, insulation etc. Contact Nuaire to discuss the full system
design requirements.
2.1 Code Description:
MEV-ECO-H
| |
1 2
1. Range:
Continuous Mechanical Extract
Ventilation
Unit
2. Humidistat:
No Suffix
= No Humidistat
H
= Integral Humidistat
2.2 Dimensions (mm)
596
340
34
34
125
153
153
=
=
=
=
OUTLET
INLET
INLET
INLET
ALL DUCT CONNECTIONS 204 x 60mm
265 CRS
575 CRS
4x MOUNTING POINTS
ACCESS MOULDING
CONTROL COVER
MAINS CABLE ENTRY
1
Unit Dimensions
