NuAire DuctMaster DCB 315 Installation And Maintenance Manual Download Page 14

14

Spares

In view of the fact that the product incorporates sealed
for life bearings and utilises no consumables we would
not recommend a stock holding of spares. 
In the unlikely event that a failure should occur contact
our service department and quote the fan rating label
details.

Service 

As a manufacturer NuAire provides you with factory
trained Service Engineers.

Our Engineers are supported by a comprehensive range
of spare parts 'off the shelf '.

If you are an industrial or commercial user, you may be
interested in details of NuAire's regular maintenance
Service Contracts. This is a worthwhile service that
helps you get the most from our products.

Our Service Department will be happy to give you 
more information.

Please Telephone:       

01222 858271

3 YEAR WARRANTY

The three year warranty starts from the date of delivery and
includes parts and labour for the first year.

The labour element is subject to full, free and safe access to the
equipment as recommended by the CDM regulations.

The remaining two years covers replacement parts only.

NOTE:
Installation & Maintenance of the equipment must be as
directed in the instructions provided with the unit.

Controls Application Service (CAS)

A team of Engineers and technicians is available to provide pre and
post order support.

We are on hand to provide help and advice from the most basic use
of any NuAire equipment to the more complex applications, max-
imising on the versatility of our SMART and NetLink 
control products.

Telephone:   

01222  858585

Facsimile:   

01222  858586

W

ARNING

!

1. D

O NOT REVERSE IMPELLER DIRECTION FOR

OPERATION AS THE PERFORMANCE OF THE UNIT

IS DRASTICALLY REDUCED

.

2. D

O NOT ALTER THE BLADE ANGLE OF THE

IMPELLER WITHOUT THE PERMISSION OF

N

U

A

IRE

.

T

HE ABOVE MAY INVALIDATE YOUR WARRANTY

Installation and Maintenance  

DUCTMASTER BIFURCATED

Summary of Contents for DuctMaster DCB 315

















Reviews: