Pal Products, Inc
2500, 48
th
Street South, P.O. Box 905
Wisconsin Rapids, WI 54495-0905
(715) 421-0445, www.nu-temp.com
TURNING ON/OFF THE VOICE ANNOUNCEMENT
The VOICE
on/off control lets you turn the countdown timer's voice announcements on or off.
To turn off the voice, repeatedly press
VOICE on/off
button until" JC " icon shows on the
display. Please note, even the voice is turned off, there will still be alarm sound when counting
down to 0:00:00. To turn on the voice, press
VOICE on/off
button until "X "disappears on the
display.
Tip: There is no voice announcement for count up. However if you want the voice
announcement during count up, you can use the countdown function and set the time to 1
second. Then the unit will announce the count up time as "over" after 0:00:00.
TALKING CLOCK
SETTING THE TIME
1. Slide the function switch to
CLOCK SET.
2. Press
HR,
MIN, and
SECOND
to set the hour, minute and second respectively. A voice
announces the entered value. If you press and hold down HR, jy|iN nr
SECOND
the hour, minute
or second will advance quickly.
3. Slide the function switch to
CLOCK.
TIME ANNOUNCEMENT With the function switch set at
CLOCK
position, pressing any
button (except
VOICE on/off)
will announce the current time. Tip: although there is no
alarm for the clock, you can use the countdown timer to quickly set up the alarm
time. For example, if you want to get up at 7:OOAM (7:00) in the morning and the current
time is 11:OOPM (23:00), you can set 8:00:00 for the countdown timer
and turn off the voice. The alarm (one of the 6 you selected) will go off at 7:OOAM(7:00) in
the morning. In fact, this is an easier way of setting the alarm than
the alarm clock.
USING THE COUNT UP, COUNTDOWN, AND CLOCK
You can operate count up, countdown, and clock simultaneously with affecting each other. For
example, you can start the
COUNTDOWN
then set the switch to COUNT UP to start the count
up timer, i then switch to
CLOCK.
In
CLOCK
mode, both ' countdown and count up are still
running on the background as indicated by the flashing COUNTDOWN and COUNT UP on the
display while a steady
CLOCK
is shown on the display.
CHANGING BATTERIES
This unit is powered by 2 AG13 alkaline batteries. If voice announcements sound weak or the
display jims, replace the batteries. Follow these steps to replace the batteries:
1. Slide open the battery compartment cover.
2. Remove the old batteries and replace with 2 fresh AG13 batteries.
3. Replace the battery compartment cover.
Notes:
1 Remove the batteries from the unit if you do not use the unit for a long period of time.
2. Never mix fresh batteries with old ones.
Common Questions:
Q. I can't find the controls for voice, sounds and repeat.
A. They are found underneath the upper section of the unit. Just pull down on the grippers
provided on each side, holding the top portion firmly.
Q. The Talking Timer does not Talk.
A. Press the voice button to activate or shut off voice
.
