NTT docomo MONO MO-01K, Instruction Manual

Page: 37 / 162

Before Using the Terminal
35
Flick
Touch the screen and sweep the finger quickly.
Switching portrait/landscape view
You can switch the display view by tilting the terminal lengthwise or
sideways.
1
From the Home screen, [Settings] → [Display] →
[When device is rotated]
2
[Rotate the contents of the screen]/[Stay in
current orientation]
◆
Information
･
Even when you change the orientation of the terminal, the screen
may not change depending on the screen displayed.
･
The screen view cannot be switched by changing the orientation
when the terminal is almost level against the ground.
･
You can make the setting from the quick setting panel. → P.44
Silent mode
You can switch the Mute key to mute ringtone for incoming call or
docomo mail, operation sounds, etc.
･
You can set whether to enable vibrator in silent mode → P.101
1
Slide the Mute key down
Canceling the silent mode : Slide the Mute key up
◆
Information
･
Even in silent mode, "media sound" such as video sound or music,
and "alarm sound" such as alarm sound of timer sound cannot be
muted. To mute the sound, adjust the volume.
→ P.101
Alternatively, press the volume key and then tap on the volume
adjustment bar at the top of screen → / to mute sound.
･
Even in silent mode or regardless of the volume settings, shutter
sound for still image shooting, shooting start/end sound for video
recording, auto focus lock sound, count down sound for self-timer,
and screen shot sound on still image/video shooting screen of the
camera are not muted.
Screenshot
You can save a screen displayed on the terminal as an image.
･
Some screens may not be saved.
1
Press and hold
O
and the lower part of
volume down key at the same time (1 sec. or
more)
･
Screenshot images are saved in png format. They can be
viewed with "Gallery" or "Photos" application.