P3250-1M
Multimeter digital “BT”, True RMS
8
LCD Backlight and Flashlight
To implement the test among darkness, you can activate the LCD backlight and flashlight
by pressing
for more than 2 seconds. The backlight and flashlight will last for one
minute. To turn off manually, pressing
for more than 2 seconds.
Selecting the Range
Auto ranging is set as default when the meter is powered on,
is displayed.
When auto ranging is enabled, press
to enter the manual range mode.
In manual range, each additional press of
sets the multimeter to the next
higher range, unless it is already in the highest range, at which point the range
switches to the lowest range.
When manual range is enabled, press
for more than 2 seconds to enter the
auto ranging mode.
Note
: Manual range is not available when measuring capacitance.
