P3250-1M
Multimeter digital “BT”, True RMS
7
Adjusting the Tilt Stand
Pull the tilt stand outward to its maximum reach (about 70° to the meter body).
Power On/Off
(1)
To power ON the multimeter, turn the rotary switch to any other position except
.
(2)
To power OFF the multimeter, turn the rotary switch to the
position.
Sleep Mode
The multimeter automatically enters the sleep mode if the rotary switch is not moved or
a key is not pressed for 30 minutes.
(When the Bluetooth is activated, this function is disabled!)
Pressing
or turn the rotary switch will turn the multimeter back to operation
mode from the sleep mode.
One minute before Auto Power-off, the buzzer will beep five times to warn. Before
shutoff, the buzzer will emit a long beep, and then the multimeter will shut off.
Note
: In sleep mode, the multimeter will still consume a little power. If the multimeter is
not going to be used for a long period, the power should be turned off.
