P3250-1M
Multimeter digital “BT”, True RMS
48
Multimeter Offline Record (PC Software)
When measuring, you can use PC software to send a command, the multimeter will start
recording the measurements. After receiving the command, the connection will be
disconnected automatically. The multimeter will record the measuring data in its own
memory. After completion of the record, use PC software to reconnect the multimeter,
and then you can read the measuring data into the Android device as a CSV file. You can
use this function to record for a long time without staff on duty, while reducing
Bluetooth consumption to conserve the battery power of the multimeter.
Note
: When the low battery indicator
appears on the meter screen, the offline
record function may not work correctly. Please check the batteries of the meter to
ensure them in a good state.
(1)
Connect the multimeterBLE software with the multimeter, see "
" on P37.
(2)
On software interface, click the
softkey on the right, a dialog will show.
(3)
Set "Interval" and "Record counts" (maximum records count is 10,000). Click "
start
offline record
". The memory in the multimeter can only store the recording data of
one time. When start to record, the earlier offline record stored in the multimeter
will be overwritten.
Note
: If you want to interrupt the recording process of the multimeter, reconnect
the software and the multimeter, select "Stop recording".
(4)
After completion of the record, to read the measuring data, reconnect the software
and the multimeter.
