4
#
LABEL
CONNECTOR/LED
DESCRIPTION
1
IR
Sensor
Not Used at this time
2
Mic In
3.5mm Jack
Microphone Input; extended to Line Out of Tx
3
Line Out
3.5mm Jack
Audio Output; extended to Line In of Tx
4
USB
USB Type A Female x2
Connect to USB devices (keyboard, mouse, flashdrive,
touchscreen)
5
R T G
3-Terminal Block
For RS232 extension: Rxd/Txd/Gnd
6
DP Out
HDMI Female
DisplayPort out to display; maximum resolution is
3840x2160@30Hz
7
Link
GREEN LED
LED blinks indicating Ethernet packets are being transmitted
8
Power
RED LED
LED Illuminates solid red when power is applied
9
Fiber
SFP Port
SFP module is attached for Fiber cable connection
10
LAN
RJ45 Female
Attach CATx cable here from Tx or network switch
11
----
DIP Switches
Used to establish unique identifier of pair
12
SW1
Button
After pressing SW1, the Uart Baudrate -> Update EDID will show
on the top left of the screen in sequence. The OSD menu will
disappear after 10 seconds.
Note: "Uart Baudrate"= baudrate of the RS232 transmission
13
SW2
Button
As you press SW1 to show the baudrate on the OSD menu, press
SW2 to change the baudrate. The font will change to red.
Repeatedly press SW2 to cause the Uart baudrate to be shown
sequentially 115200 -> 57600 -> 38400 -> 19200 -> 9600 -> 4800 -
> 2400 -> 1200.
When the desired baudrate is shown, press SW1 to have it take
effect and update. The OSD menu will disappear after 10
seconds.
14
None
USB Type A Female x2
Connect to USB devices (keyboard, mouse, flashdrive,
touchscreen)
15
DC 9-24V
Power Jack
System power supply connection
