NTI
4K HDMI
SPLITTER/
EXTENDER VIA
CATX
2
MATERIALS
Materials supplied with this kit
:
VOPEX-C64K18GB-4 Local Unit
VOPEX-C64K18GB-4 Remote Units (x4)
100-240VAC, 50 or 60Hz-12VDC/2A AC Adapter
100-240VAC, 50 or 60Hz-12VDC/1A AC Adapter (x4)
IR Blaster and cable
IR Receiver and cable (x4)
URL Slip with web address of this manual
Materials
Not
supplied but
REQUIRED:
Use HD-xx-MM cable to connect an HDMI source or display.
o
Maximum HDMI cable length:
50 feet for resolutions up to 4K @ 30Hz
25 feet for resolutions up to 4K @ 60Hz
Use CATx solid or stranded straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors.
Cables can be purchased from Network Technologies Inc by calling (800) 742-8324 (800-RGB-TECH) in the US and Canada or
(330) 562-7070 (worldwide).
PREPARATION FOR INSTALLATION
Locations should be chosen for the monitors, mice, and keyboards that also have space to connect the Remote and Local
Units within the distance provided by the cables.
The CATX cables must be run to the locations where the Remote and Local Units will be connected. Be careful to route the
cables away from any sources of magnetic fields or electrical interference that might reduce the quality of the video signal
(i.e. AC motors, welding equipment, etc.).
All cables should be installed in such a way that they do not cause stress on their connections to the equipment. Extended
lengths of cable hanging from a connection may interfere with the quality of that connection. Secure cables as needed to
minimize this.
Properly shut down and disconnect the power from the CPU and monitors to be separated. If other equipment is involved
whose connections are being interrupted, be sure to refer to the instruction manuals for that equipment for proper
disconnection and re-connection procedures before proceeding.
Local and Remote Units should be grounded through either a display or source that uses a 3-prong power cord. If only one
unit is grounded, shielded CAT5 cable should be used.
Note: CATX connection cable used between NTI XTENDEX Series Local and Remote or any XTENDEX Series products
should not be run underground, outdoors or between buildings.
WARNING: Outdoor or underground runs of CATX cable could be dangerous and will void the warranty.