Click the “Finish” button and the restart the computer interface appears:
Click the “Finish” button to
complete the installation process of the application, and the computer will restart. After
the computer restarts, the icon will appear on the desktop
.
Step 2
：
USB2.0 Extender #2 Driver Installation for Sender
After restarting the computer, connect the Sender to the USB port of the computer
and “
Found New Hardware
“ will appear in the bottom corner of the screen. Then it will change to “
Installing New
Hardware
” followed by “
New Hardware is Ready to Use
”.
If a window appears calling for new hardware installation, follow the prompts to install it.
Step 3: Driver Installation for Receiver
1. Double-click on the “Launch USB 2.0…” icon on the desktop.
2. The round portion will appear in the tray at the bottom right. Notice the red dot. This indicates the Receiver
is not connected.
3. Connect the supplied 5V power supply to the Receiver.
4. Connect the Receiver to the Sender using a CAT5 cable. If the drivers for the Receiver to install automatically,
then you will be prompted to install them. Follow the prompts to install the drivers.
5. Once the drivers are installed, the icon will change to
You are now ready to connect a USB device to the receiver.