HOW IT CONNECTS
Point to Point
The HDMI over IP Extender
with LED system consists of a
Transmitter and a Receiver (sold separately). The HDMI source
(set-top box, DVD/BluRay player, gaming console, etc.) connects to
the Transmitter unit. The Receiver unit connects to the HDTV display
in the same way. One 100 Ohm Cat5e/Cat.6 cable (up to 100 meters
long) links the Transmitter and Receiver. Power is applied to the
Transmitter and Receiver with 5V DC power supply (included). High
Definition picture and
Sound are then transmitted into the HDTV
screen
. HDMI Source Device can also be controlled remotely using
the built-in IR repeater in the System at the Receiver side.
Point to Multi-Point
The HDMI source connects to Transmitter unit via a high quality HDMI
cable. 100 Ohm Cat.5e/Cat.6 cables (each up to 100 meters in length)
link the Transmitter and Receivers via a Gigabit Full Duplex network
switch. The Receiver units connect to each of the HDTV displays via a
high quality HDMI cable. Power is applied to the Transmitters and
Receivers with 5V DC power supply (included). High Definition picture
and
Sound are then transmitted into the HDTV screens, prov
ided each
receiver unit which is set to the required source
channel (remote
control supplied).
HDMI Source Devices can also be controlled
remotely using the built in IR repeater in the HDMI over IP Extender
V2.0 with LED System at Receiver side.
Multi-Point to Multi-Point
The HDMI source devices connect to each Transmitter unit (64 Max)
via a high quality HDMI cable. 100Ohm Cat.6 cables (each up to 100
meters in length) link the Transmitters and Receivers via a Gigabit Full
Duplex network switch that must support IGMP functionality. The
Receiver units connect to each of the HDTV displays via a high quality
HDMI cable. Power is applied to the Transmitters and Receivers with
5V DC power supply (included). High Definition picture
and Sound are
then transmitted into the HDTV screens, provided each receiver unit is
set to the required source channel (remote control supplied). HDMI
Source Devices can also be controlled remotely using the built in IR
repeater in the HDMI over IP Extender with LED System at Receiver
side.
Note
：
ST-IPHD-IR-LC is HDCP 2.0 compliant.