NTI XTENDEX 300 Foot HDMI and IR Extender
11
Plug-in and Boot Up
1.
Plug the power cord(s) from the video and audio source(s) into power outlet(s).
2.
Connect the AC adapter power connectors to the 24VDC port on
either
the Remote or Local Unit. (AC adapter shown in
Figure 13)
3.
Plug the AC adapter into a power outlet. The “Power” LED (green) on the CAT5 connector of each unit should illuminate,
indicating that a proper power connection has been made.
4.
Turn ON the video/audio source(s) and display devices. They should each react as if they were directly connected to each
other. The yellow “Traffic” LEDs on the Remote and Local Units (see Figure 12) should blink indicating there is proper
communication between them.
Note: A loss of signal (blank screen) may be experienced for an instant during the automatic video quality adjustment
process after powering-up. This may also occur if the XTENDEX senses a loss of or weak signal connection in the
CATx cable
.
Figure 13- Connect AC adapters