NTI XTENDEX 600 Foot Extenders
15
Plug-in and Boot Up
1.
Plug the power cord from the monitor into the power outlet.
2.
Connect each AC adapter power connector to the 9VDC ports on the Remote and Local Units Plug each AC adapter into a
power outlet. The green LED on the RJ45 connector of both the Remote and Local Units should illuminate, indicating that a
proper power connection has been made to them. (See Figure 12.)
Figure 12- Connect the AC adapter to the Remote Unit
3.
Turn ON the CPU and Monitor. They should each react as if they were directly connected to each other.
Note: The Traffic LED on each RJ45 connector will illuminate anytime data traffic is passing between the Local and
Remote Units, indicating proper CAT5 cable connection and communication. (See Figure 12)
Green Power LED
9 VDC
Adapter
ADAPTER
Barrel
(Inside
barrel)
(Outside
barrel)
Power Connector
2.1 mm x 5.5 mm Female
9VDC @ 1.0A OUTPUT
Yellow Traffic LED
Rear View of Remote Unit
ST-C5KVM-R-600