2
Figure 1- Sensor configuration page from E-16D
Figure 2- Sensor configuration page from E-2D
For the E-16D, on sensor
configuration page, place a checkmark
in the “Enable Siren” box for any
sensor that should activate the piezo
when it causes the ENVIROMUX to
send an alert.
For the E-2D,E-5D, or E-MINI-LXO, on
sensor configuration page, make sure
the associated output relay isn’t “none”
and either change the “Output Relay
status on alert” to Active (if connected
as shown in the drawing) or Inactive
(if you connect the piezo wire to the
N.C. relay terminal).
