© 2017 NTF
®
INST-OLFS6F-EN 120917-02
page 3
4. SAFETY REGULATIONS, RISKS AND WARNINGS
5. OPERATING INSTRUCTIONS (INCLUDING MOTOR)
6. TRANSPORT, STORAGE AND DISPOSAL
Installation of this unit is only allowed to certified professionals engineers. In
case of warranty claims certificates will be requested
The unit must be properly grounded to avoid any static electricity
Before switching on the unit ALWAYS check that there are no restrictions in
the suction and return line. In case valves are installed in suction and or return
line of the filter unit these valves should be opened before the unit is switched
on.
When replacing the filter elements or when fuel spillage occurs, use the
personal safety equipment, as prescribed in the Material Safety Data Sheet.
Check also personal safety regulations at site.
The filter is functional when the motor is running. Installation should be done by certified electrical engineers.
The user is responsible for the proper electrical wiring and installation of the filter unit. User must determine the
appropriate guidelines as to when and how switch the unit to on and off. Additional information with regard to
this point can be found under no.13
“
Technical specifications motor
”
.
This OLFS-unit has been carefully packed to avoid damage during normal transport. Should your OLFS unit
arrive damaged, please take pictures of the occured damages and send these with a description to your
NTF
®
dealer, so the damaged unit can quickly be replaced. There are no further special requirements for transport or
storage.
When the OLFS unit or filter element is disposed off, the local regulations for disposing chemical waste should
be taken into account.