Vibratory plate compactors
Operation manual
Page
14
It is recommended to write down important identification data of your machine into the following table.
You will find it useful when ordering parts or service, in case of a warranty claim or in the event of
reporting stolen equipment:
Model
Serial number
Year of production
Engine type
Engine serial number
- Continually check that the engine leaks or a vibrator oil. In case of failure to contact an authorized
service center or manufacturer.
- Bolted joints are glued to rubber mount. We therefore recommend against any potential activity
associated with the tightening and loosening of joints and contact information to an authorized service or
the manufacturer.
3.
PRIOR TO STARTING
Check the oil level every day!
Use only the recommended types of oil. Choose the oil viscosity to match the thermal conditions of space
use.
3.1. Inspection of engine oil level
ATTENTION:
Running the engine with insufficient oil level can result in serious engine damage.
In case of oil leakage from the engine immediately stop the operation of the machine and call service or
contact the manufacturer.
Checking the oil level must be in accordance with the instructions for operating the engine!
Place the machine into a horizontal position. Before you unscrew the plug from the control / filler on the
engine, so carefully clean the area to prevent degradation of oil contamination and subsequent engine
damage. With proper oil level is level with the hole at the same time, oil is leaking slightly.
Fig. Check engine oil level
