Asphalt and concrete cutters
Operation manual
Page
15
issued 01/2017
3.5 Tipping machine
Tipping machine when the machine tipped over may break of oil into the carburetor, or the plunger.
Therefore, we recommend to inform the authorized service center, or the manufacturer about how to
proceed.
4.
OPERATION
4.1. Starting
4.1.1. Gasoline Engines HONDA
1. Turn the fuel tap into the ON position.
2.
Turn on the electric switch of ignition.
3. Engage the choke („CHOKE“). Do not use it
at warm engine or at high ambient
temperature.
1.
Adjust the throttle control lever to idle.
5. Pull out the starter grip slowly till some
resistance is felt, then pull vehemently. Do
not release the grip, but return it slowly into
the original position.
6. Let the engine to warm up, then disengage
the choke.
7. Let the engine to run at idle for a while
before loading.
8. For cutting, shift the throttle control lever to
fully open position.
DANGER!
The spindle and the cutting disc begins to
rotate immediately. Be sure that the
revolving disc would not cause any danger
for the bystanders. Have the disc cover closed
before starting. When using SUBARU engine,
proceed according to SUBARU engine
manual.
