29.
Once you finished with the T-Taps
on the Trailer brake, route the
harness through to the back of your
Cigarette/USB panel.
(Figure 34)
27.
Using 10mm socket take both bolts
out shown in (Figure 32)
28.
Route the lightbar harness with the
T-Tap connectors into the back of the
Trailer Brake Output.
Red/Black Wire T-Tap connects to
Yellow Wire (12V Ignition)
Blue Wire T-Tap connects to
Green Wire(Illumination)
Note:
On the trailer brake harness you
will need to cut away some factory insu-
lation to find your yellow and Green wire.
(Figure 33)
2018 Models
you will need to connect
the T-Taps to your cigarette lighter outlet
and not the Trailer Brake wires. Connect
both wires onto the power side of the
cigarette lighter.
TRAILER BRAKE
GAIN
+
TYPE
OUTPUT
Fig 32
Fig 33
Wire Harness
Fig 34
