nStor NexStor 4200F Series, User Manual

Page: 61 / 174

Chapter 3 - Setup and Installation
Completing the Installation
49
Attaching the Front Bezel (Rack and Tower Models)
2
Install the SFP Transceivers.
a
Insert the transceiver(s) into each of the SFP cages on the Disk I/O cards.
The transceiver can only be installed one way. Note the orientation and
ensure you are inserting them correctly.
NOTE:
Refer to the illustration on the following page.
b
Push the transceiver fully into the SFP cage so that it completely seats.
The transceiver protrudes approximately 1/2-inch from the face plate of
the card when it is fully seated.
c
(Optical Transceiver) Remove the dust covers just prior to inserting the
FC data cables and store the dust covers in a safe place.
Res
et A
larm
R
E
S
E
T
A
L
A
R
M
4200F.book Page 49 Thursday, January 23, 2003 2:47 PM