User Manual of Network Fisheye Camera
62
You can configure the camera to trigger the alarm when the lens is covered and take
alarm response action.
Steps:
1.
Enter the Tamper-proof Settings interface:
Configuration > Advanced Configuration > Events > Video Tampering
2.
Check the checkbox of
Enable Video Tampering
to enable video tampering
detection function.
Figure 5-39
Video Tampering Detection Settings
3.
Set the detection area for video tampering. For details, refer to Step 4 in
Section
5.6.1.
4.
Click
Edit
to edit the arming schedule for video tampering detection. For details,
refer to Step 5 in
Section 5.6.1.
5.
Check the checkbox to set the alarm actions for video tampering.
Notify surveillance center, send email and trigger alarm output are selectable.
For details, refer to Step 6 in
Section 5.6.1.
6.
Click
Save
to save the settings.
