Playing back video footage on TV
EN
Turn on the device, connect to video input port and audio input port of TV by using one side of the
AV cable provided. (NOTE: video plug is yellow, audio plug is red / white).
On the other side connect to the device,; TV is in playback status; shortly press “On/Off”
key
to
begin to play back the video. Press again the “On/Off”
key
to pause playback; for continuous
video playing press the “On/Off”
key
again; press the "On/Off" key for 2 seconds and you can
select the next video footage; When there are no files in device memory, TV will display “NO
IMAGE”.
Note: Under AV status, and with no operation, the device will shut off automatically
Storage
EN
1. The
device
supports
a
built
‐
in
memory
of 8
GB.
2. When space is exceeded, device will start data saving and then shut off.
Connecting to PC/Laptop
EN
1. System Requirement
1.1 CPU 500MHz or higher
1.2 Operating system: Win2000/XP/Vista/Win7
1.3 USB port
1.4 Minimum 1GB of free hard disk space
1.5 Minimum 512MB RAM
2. USB Storage mode
2.1 When device is under "OFF" status.
2.2 Connect the device to PC or Laptop thru USB port with USB TV out cable provided in the kit,
the red led is on.
2.3 Turn on the device, the green LED is on.
2.4 The movable disk icon will pop up in the computer after 3sconds (depends on the memory
Capacity).
2.5 The directory for saving video file is *Disk\ DCIM\100DSCIM.
2.6 You can then copy or cut and save to your local hard drive
2.7 When finished, click the movable device management icon at the right lower corner to remove the
storage disk safely; or click the "On/Off button for 2 seconds
‐
the green LED stops blinking, then
switches off.
3. PC Camera
3.1 Under USB storage mode, click the folder "PC Camera Tool" in the root directory and enter.
3.2 Copy the file "en
‐
188.EXE" to your desktop,
Select the PC camera program "PC Camera Driver.exe" and install it to your computer.
3.3 After installation, unplug the device and remove it from computer.
3.4 Start the device, then connect it again to the computer.
3.5 Computer will search the drivers and install the camera.
3.6 Run program en
‐
188.exe on your desktop.
3.7 You are now able to use the device as the PC camera.
3.8 If your computer has another camera pre
‐
installed or embedded, disable it before you can use
this device as a PC camera.
