background image

7

 

12 Gallon Extractor 

 

 

NSS® Enterprises, Inc. Limited Warranty 

Effective for machines purchased after August 1, 2015 (Revision S) 

 

Warranty Registration

 

Register your new product by visiting www.nss.com and clicking on the “Product Registration” link. 

 

Warranty Policy 
NSS Enterprises, Inc. (NSS) warrants its new machines against defects in material and workmanship under normal use, service and maintenance (defined in the 
NSS Operation and Maintenance Manuals) for the warranty period as detailed below. This warranty is limited to machines and products that are purchased from 
an NSS Authorized Distributor or directly from NSS and is limited to the original end-user.  Under this warranty, NSS will repair or replace, at its option, any covered 
part which is found defective in material or workmanship during the applicable warranty term or until the hour meter reaches the specified amount, whichever is 
first. This repair or replacement shall only be performed by an NSS Authorized Distributor or Service Center. All shipping charges for replacement parts or repaired 
machines will be the responsibility of the original end-user. When requested, machines and/or parts must be returned to NSS for inspection to obtain this warranty. 
NSS reserves the right for final determination of warranty coverage. Parts repaired or replaced under this warranty are warranted for the remainder of the original 
warranty period.  When covered, a maximum of 4 hours travel time will be allowed.  When out of the continental USA, Labor, Freight and Travel may have different 
considerations. 
NSS will not be liable for any other or additional damages, including but not limited to indirect or special consequential damages arising out of or in connection with 
the furnishing, performance, use or inability to use the machine. The buyer agrees and understands that the remedies provided under this limited warranty are the 
sole and exclusive remedies available to the buyer.  NSS reserves the right to change its warranty policy without notice. 

Start date of warranty for MACHINES 
The start date of this warranty is the purchase date by the original user, or six months from the date the machine was shipped from the factory, whichever is earlier. 

Start date of warranty for BATTERIES, including those installed in machines at time of purchase 
The warranty period for the batteries starts on the date of sale or 90 days after the machine was shipped from the factory, whichever is earlier.  Batteries must be 
recharged at least once every 90 days. 

Exclusions 
This warranty shall not apply to:  (1) Damage incurred during shipment.  (2)  Any product that has been subject to misuse, abuse, negligence, overloading or 
accident. (3) Improperly used products or use of the product for other than its intended purpose. (4) Failures due to lack of mandatory maintenance as described    
in NSS Operation and Maintenance Manuals, Videotapes and/or Wall Charts.  (E.g., lack of scheduled lubrication or inadequate flushing of chemical solutions.) (5) 
Any machine modified from its original design (unless authorized by NSS) or repair services performed by non-authorized service centers. (6) Damage or failure 
resulting from the use of corrosive or incompatible chemicals. (7) Replacement of ordinary wear items including but not limited to: bumpers, belts, carbon motor 
brushes, electrical components exposed to moisture, filter bags, hoses, casters, wheels, gaskets, seals, cords, circuit breakers, switches, check valves, solenoids, 
pumps, squeegee blades, M-1 fans and fan hoods, and shoes on NSS manufactured cast aluminum tools. (8) Machines using after-market parts not supplied by 
NSS, including the ordinary wear items listed above. 

 

 

 

 
 
 
 

 

Summary of Contents for RALLY 220H









Reviews: