
-
7
-
3-2 Assemble the Slide Ring
Insert the Slide Ring into the Housing and align a groove on the Slide Ring with slots on the Housing.
Confirm the direction of the Slide Ring.
Grease the groove and slots, and place a ball on the slot on each side.
Look from the top of it and align the balls on the Housing with the hollows inside Bur Lock Ring. Insert the Housing
into the Bur Lock Ring slowly.
After the Slide Ring is set in the right position, mount the Bur Lock Ring Retainer securely, using the DT-145.
Then, assemble the remaining in the reverse order of disassembling.
Hollows
Grease
Slide Ring
DT-145
DT-203