30
Operation of SMH/HMH Series
Mounting the Irrigation Nozzle (Optional)
_ Mounting
1
Insert the Irrigation Nozzle
Ⓐ
onto the Bur Guard
Ⓑ
of the
Attachment, making sure that the correct end of the Irrigation
Nozzle goes in.
2
Insert the Irrigation Tube
Ⓒ
into the Irrigation Nozzle
Ⓐ
.
Ⓐ
Ⓑ
Ⓒ
_ Removing
Perform steps 1 and 2 of the mounting procedure in the reverse
order.
* For the related connection and the setting on the Control Unit, refer to OM-SE0021E Primado2 OPERATION MANUAL Control Unit and Foot
Controls.
Mounting and Removing the Cutting Accessories (Optional)
_ Mounting
1
Rotate the Twist Collet
Ⓐ
in the direction of
Ⓑ
until it clicks.
Insert the Cutting Accessory
Ⓒ
all the way while twisting it.
Ⓑ
Ⓐ
Ⓒ
Chuck Open
2
Push or pull the Cutting Accessory to adjust the exposure length
as required (when using Slim Attachment 300).
Ring Marks
Adjustable range
10.0 mm
(2.0mm interval)
3
Rotate the Twist Collet
Ⓐ
in the direction of
Ⓓ
until it clicks.
Ⓓ
Ⓐ
Chuck Close
4
Pull the Cutting Accessory
Ⓒ
lightly to confirm that it is
securely connected to the Attachment.
Ⓒ
Securely
_ Removing
Perform steps 1 through 3 of the mounting procedure in the reverse order.
NOTICE
●
For Slim Attachment 300 applicable Cutting Accessory, the exposure length of its tip can be adjusted within the chucking range by
changing the chucking position.
●
The exposure variable range of the Cutting Accessory is 10mm.