Air Circulator
Thank you for purchasing this air circulator. Please read the instructions and
warnings carefully before use to ensure safe and satisfactory operation of this
product.
Please retain this information for future reference.
Appliance components
A.
Fan grille
B.
Rotary controls (not visible)
C.
Motor
D.
Tilt pivot (120º rotation)
E.
Fan blade
F.
Stand
G.
Fan grille securing screws (8pc)
H.
Non-slip feet
Operation
1.
Position your fan on a dry, level surface & plug into an electrical socket.
2.
Select 1=Low; 2=Med or 3=Hi on the rotary speed control switch (“B” above
not visible – located on the back of the fan). Select 0 to turn OFF the fan.
3.
Airflow direction can be adjusted upwards or downwards by simply tilting
the fan head to the desired angle. Up to 120º rotation.
Cleaning & Care
♦
Unplug the appliance before cleaning.
♦
Do not use any chemical-based solutions for cleaning metal surfaces.
♦
Slightly moisten a cloth and then wipe the surfaces of the fan.
♦
In order to remove the dust from the protective fan grille use a vacuum
cleaner or undo the securing 8pc screws on grille edge and wipe fan blades
with a damp cloth.
♦
Ensure fan is completely dry and the fan grille securely refitted before
storage or reconnecting to electrical supply.
♦
Never immerse the fan or fan motor in water or other liquid.
♦
If the fan is not used for long periods, protect with a suitable cover after
cleaning, then store in a dry place.
♦
The motor bearings are permanently sealed and do not require additional
lubrication.
This appliance complies with both the low voltage and electromagnetic
compatibility directives. Its construction complies with current safety standards.
We reserve the right to make technical changes without prior notice.
BS plug wiring
1.
Wiring instructions: Should it be necessary to change the plug please note
the wires in the mains lead are coloured in accordance with the following
code:
BLUE – NEUTRAL * BROWN – LIVE * GREEN AND YELLOW - EARTH
2.
As the colours of the wires in the
mains lead of this appliance may not
correspond
with
the
coloured
markings identifying the terminals in
your plug, proceed as follows:
3.
The BLUE wire is the NEUTRAL and
must be connected to the terminal
that is marked with the letter N or
coloured BLACK.
4.
The BROWN wire is the LIVE and must
be connected to the terminal that is
marked with the letter L or coloured
RED.
5.
The GREEN/YELLOW is the EARTH and
must be connected to the terminal
which is marked with or the letter
E or coloured GREEN OR GREEN/YELLOW.
6.
Always ensure that the cord grip is positioned and fastened correctly.
If a 13A (BS 1363 fused plug is used it must be fitted with a 5A fuse. If in doubt
consult a qualified electrician.
3
2