9
With the fan ON – you can set the run time between 1 and 8 hours duration. On
the manual controls [refer Fig.4], press the Timer button “3” once and then press the
Speed/Hours button “2” to increase the hours to the desired setting.
Using the remote control, press the Timer button once and then use the “+” to
increase the timer duration from 1 to 8hrs or use “–“ to decrease, until the preferred
duration is achieved.
Timer
The LED displays a flashing clock and an “h” beside the number during the selection
process – when the desired time is selected either press the Timer button “3” again or
stop pressing any buttons. The flashing will stop to confirm after 2-3 secs – displaying
time selected. The display will then revert to show the speed set plus a static clock
symbol indicating the Timer is set.
The display will automatically turn off after 30 secs.
If the LED display is off – you will need to press any button on the remote control or
the manual controls to turn on the display, then press Timer on the remote control
using “+” or “–” in the normal way, to change the time selected.
TIP: Our suggestion is to always set the Timer, even for 1 or 2 hours – so you don’t
need to remember to turn off the fan if you leave the room or your house – it will turn
off by itself after the set time is reached!!