3
6.0 Installation Instructions – Divan Bed
6.1 Remove the mattress and place the Bed Rail Board
onto the divan base in the desired position. Ensure that
the Hand Rail Guide is positioned downwards over the
edge of the divan (see Diag.5).
6.2 Place the Hand Rail into the Hand Rail Guide.
Please Note: the hand rail can be rotated so the
angled part of the handle is facing towards or away
from the user, depending on their needs.
Secure in
position with the two e-clips.
6.3 Position the Bed Rail such that the user can reach
the handle from a relaxed lying position without having
to stretch.
For the safety of the user, this must be at
least 320mm away from the headboard or footboard.
To secure the Bed Rail to the divan bed with the straps
provided, as follows:
6.4 Take the first strap. Place the female buckle through
one of the triangular slots near the Hand Rail (A) and tie
a secure knot. The buckle should hang down the side of
the bed around 50-75mm (2-3 inches) (see Diag.6).
6.5 Feed the strap under the bed-rail board and up
through the rear triangular slot (B), loop it round the end
of the bed board and back through the slot (B) (see
Diag.6). The strap should be tight under the bed-rail
board, and the bed-rail board should not slide on the
strap.
6.6 Feed the strap over the top of the bed and back
underneath the base (see Diag.7). To fit the strap under
the divan base, take the strap to the end of the divan
base, lift up the end of the divan base and feed the
strap underneath the legs / castors.
6.7 Once the strap is underneath the divan base, bring
the male buckle up the side of the bed to meet the
female buckle hanging down.
6.8 Clip the two ends of the strap together.
6.9 Pull down on the loose end of the strap to tighten.
The Bed Rail Base should be tight against the divan
base. Tuck the loose end of the straps under the bed to
prevent tripping.
6.10 Repeat for the second strap, fitting to the other
side of the Bed Rail Board. The Bed Rail should now be
fully secured to the divan base (see Diag.7).
6.11 Replace the mattress. Check the Bed Rail is stable
and secure before use.
Point “B”
Diagram. 7
Diagram. 5
Bed Rail Board
E-Clip x 2
Hand Rail
Hand Rail Guide
Diagram. 6
Slot “A”
50-75mm
(2-3”) Strap
Slot “B”
Knot Here