NRS Relief LEGEND 33 User Manual Download Page 4

Page: 4 / 4

LEGEND 33 -

ICRC/IFRC Standard

Fix the outer tent to all tent poles using the Velcro loops.

Pull out all shade net ropes and tie onto the appropriate tent pegs.

Inside the tent, secure all lower black loops with a steel pin, until

20cm remains exposed.

Pull out the outer tent skirt. Secure with twisted rod pegs. Tie the

lower guy ropes to them. Note: gable end flaps should first be zipped.

Pull out all guy ropes, secure with tent pegs, and tighten with sliders.

14.1

14.2

20 cm

Summary of Contents for LEGEND 33

Page 1: ...ront view Side view General view A 17x Tent poles B 6x Pipes C 12x Frame joints D 8x Standing poles E 4x Canopy supporting poles F 3x Shade net frames 40x Twisted rod pegs Packing list 30x Steel pins 12x Tent pegs 1x Hammer 1x Flysheet 1x Inner 1x Ground sheet 1x Shade net ...

Page 2: ... poles into all the joints Note the longer parts of the joint should face to the side Layout all the poles and joints Spread the outer tent over the ridge pole Assemble three identical shade net frames using F poles Secure the outer tent by inserting the apex joint pins through the eyelets Slot one shade net frame onto the apex joint pins along the ridge pole F ...

Page 3: ... net to each end of the shade net frames using the buckles Slot a shade net frame onto the joint pins along the each side Connect B poles to the end of each A pole and secure with Velcro flaps Spread the shade net over the top of the tent Lift the tent frame and insert the standing poles into the upper joints Do the same for both sides of the tent 7 10 8 11 9 12 11 2 11 1 B F D ...

Page 4: ...priate tent pegs Inside the tent secure all lower black loops with a steel pin until 20cm remains exposed Pull out the outer tent skirt Secure with twisted rod pegs Tie the lower guy ropes to them Note gable end flaps should first be zipped Pull out all guy ropes secure with tent pegs and tighten with sliders 13 16 14 17 15 14 1 14 2 20 cm ...