HuggyPRO 74 m
²
For more info,
visit our website:
www.nrsrelief.com
Place bull horn fittings on the three gable
end joints.
Note:
ensure that they are inserted
through the Velcro loop, and that the pin
is inserted through the hole in the roof
joint.
8
Velcro loop
Pin
Start with assembly of tent,
point 1 to 8
(
HuggyPRO 72 tent
Manual
)
Secure the roof extention panel to the bull
horns with the Velcro flap
9
Secure the cuffs around the bull horn
fittings with Velcro
10
Connect the steel wires between each
'bull horn' and turn the tension buckle until
the wire is taut
11
Pull the shade cover over the steel wire
cable
12
Hook the shade cover to the rings on the
'bull horns' and tighten the straps
13
Continue with point 12
(
HuggyPRO 72 tent
Manual
)
Instructions
