Assembly instructions
Wrap all Velcro straps around the respective poles.
7
Pull out the corners to tension the groundsheet. Secure
base plates with, J-pegs (I).
9
Secure the base of the tent with J-pegs.
Secure the
green
pole to the middle of the
blue
pole
using the clip on both sides of the tent.
10
If possible, dig a trench and bury and fill the mudflap
with stones, dirt and rocks.
11
1:
Use large T-pegs (J) to secure the four main
corner ropes.
2:
Use J-pegs (I) to secure the other ropes.
12
8
UNHCR standard – self-standing family tent
3
Outer tent
Poles
Inner tent
Mesh Windows
Attach the shade net to the
blue
poles in the tent
using Velcro loops.
14
DomeHome
Assembly instructions
1:
Place the shade cover (H) on top of the tent and close
Velcro straps to position shade net.
2:
Tie the remaining guy ropes to the pegs.
13
1
2
Tear
Cover hole with PE Fabric patch and stitch to
outer tent with needle thread. Stick duct tape over
the seams to make them waterproof.
Cover with duct tape
on both sides.
1. Needles
2. Thread
4. Duct Tape
5. PE Fabric
Hole
Pole crack
Straighten pole and slide repair
sleeve over break.
Fix repair
sleeve in place
with duct tape.
4. Duct tape
Tear
1. Needles
1. Needles
2. Thread
2. Thread
1. Needles
1. Needles
2. Thread
2. Thread
6. Mesh
6. Mesh
Hole
Cover hole with
Mesh patch and
stitch with needle
+ thread.
Cover hole with
PE Fabric patch
and stitch with
thread.
Repair tear with
thread.
Repair tear with
thread.
3. Repair
sleeve
2 x Needles
Thread
3 x Repair Sleeve
Duct Tape
PE Tape
Mesh
1
2
3
4
5
6
Repair manual
4
