2
4. ASSEMBLY
4.1 Unfolding the Rollator:
Pull the frame outward, then lock the frame in place
by pushing the crossbar down until it locks in place.
4.2 Attaching the Handles
Insert the handles and line up the holes.
Note:
The handle height must be set up correctly for
the user height. Refer to Section 4.3.
Insert 1 x bolt, making sure the bolt head slots into
the hexagonal recess.
Note:
The hand-wheel must always be on the
outside of the rollator frame.
Attach the saddle-washer, steel washer and hand-
wheel, then tighten fully by turning clock-wise.
Repeat for the opposite side.
Note:
Make sure both handles have been set to the
same height.
4.3 Handle Height Adjustment
Adjust the Rollator handle height so that when the
user’s arm is down to their side, the hand-grip is
at wrist height. This will ensure the arms are at an
approximate 20°-30° bend when using the Rollator.
Undo and remove the hand-wheel by turning anti-
clockwise.
