2
If you need to stop on an incline apply both brakes
gently, avoid sudden movements, similarly when
starting avoid sudden movements as both of these
situations could cause instability because of the
backward angle of the chair.
Apply brakes evenly as any movement sideways
could cause instability.
Avoid changing direction on a slope as this will
increase the risk of the wheelchair tipping.
Do not use as seat in a motorised vehicle.
If you are unsure about any of the safety precautions
highlighted we would recommend seeking advice
from a Healthcare professional.
3. UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.
3.1 Contents:
1. Wheelchair (folded)
2. Calf Strap
3. Footrest Assembly (x2)
4. Multi Function Spanner
5. Allen Key
6. User Instructions
4. SPECIFICATION
Maximum User Weight:
110kg (17st)
Product Weight:
11.65kg (25.5lbs)
5. ASSEMBLY/INSTALLATION
Unfold the wheelchair from its packed (folded) state,
ensure all four wheels are touching the
fl
oor and the
seat is fully opened.
Raise the hinged handles to the upright position until
the spring pins “click” and lock into position on both
sides.
Assemble the footrests to the chair frame by
engaging the holes in the footrest bracket onto the
two hinge pins on the frame, this can be done more
easily if the footrest is pointing outwards, at a right
angle with the chair side. Rotate through 90 degrees
until the chrome footrest clip springs into position.
When using for the
fi
rst time, it is important to
ensure the correct seating position, this may need
the footrest height to be adjusted. To do this slacken
the hexagon head screw, on the underside of each
footrest, with the spanner (provided). Slide the inner
tube up or down to the required position and retighten
Fit the calf strap as shown and secure with the hook
and loop fasteners.
Check the brakes are functioning correctly. If not,
refer to the maintenance section for correct brake
adjustment.
The wheelchair is now ready to use.
6. IN
USE
6.1 Folding the wheelchair
Ensure footrests are facing forward and footplates
are in the upright position, then simply pull up the
two handles on either side of the seat, see picture
above, the wheelchair can be carried using these
handles.
For transportation and storage it is recommended
that the footrests are removed & the handles are
folded down.
Remove the Calf Strap by pulling apart the hook and
loop fasteners.
Footrest removal: pull the chrome footrest clip
towards the centre of the wheelchair and lift the
footrest o
ff
the locating pins.
Handle folding: Pull the two plastic handle clips
backwards and fold the handles.
6.2 Brake operation
