47
National Rejectors, Inc. GmbH, Buxtehude
G
LOSSARY
Glossary
ccTalk
Serial communication protocol developed by Money Controls
(formerly Coin Controls) to provide secure transfer of credit
and status information between devices used in the automated
money transaction business, such as hoppers, coin
validators, coin changers or bill validators (www. ccTalk.org).
Coin payout sensor
The coin payout sensor is positioned in front of the hopper's
coin outlet and monitors the payout of a coin.
Coin signal
In parallel mode the hopper transmits a coin signal to the
control system, when the
→
coin payout sensor has detected
a coin, i.e. a coin has been paid out.
Control signal
In parallel mode the control system transmits a control signal
to the hopper, if the hopper is supposed to pay out one or
several coins. The hopper pays out coins as long as the
control signal is present.
Switching block
The switching block is located on the rear of the hopper and
incorporated four DIL switches. DIL switche 1 is used to
change the operating mode (parallel/ccTalk) and DIL
switches 2 to 4 are used to change the
→
ccTalk hopper
address.
